VBscript Assignment Help
I'm new to the vb scriptures, and I'm actually new to the scriptures in general. I have a school lab that I've been fighting for the last few days and not so long ago. Can someone help you please? Get online help with vbscript assignment from our experts.
First Step for VBscript assignment help
Task 1: IP_Array_start.vbs in Notepad ++
· Download the IP_Array_start.zip file from Doc Sharing to eCollege. Unzip lêerIP_Array_start vbs and open it on notepad++.
· Change the program header if necessary, and click Save Stopped to save the file with the name IP_Array e.vbs.
· The dark line of ipAddress (5.3) confirmed a two-dimensional array of 6x4. The maximum value of the index shall be provided in Article 5 and 3. Since the clues always start from 0, this is a 6x4 series.
First, the array site rows continue with IP addresses. The first index (0.5) shows the cameras from 100 to 105. The second index (0.3) represents the four computers in each room.
The IP address of the third computer in room 104 can be found in the ipAddress matrix or component (4.2). This value is "192.168.10.45". Look closely at the array to find out the meaning of index values.
· Now that you have an initial two-dimensional array, your task will be able to use the <a0>Windows%%amp;#160;</a0> is to investigate the matrix for the IP address of any computer (1-4) in any room (100-105).
Second Step for VBscript homework help
Task 2: Validation of the input and keyword range for
IP Addresses
Task 2: Validation of input and keyword range for
IP Addresses
1) We start by defining the variables of our application. We need two sets of variables: thread variables: Stretch cream and compStr; and numeric variables: camera and computer. String variables are required for import, and number variables are used as indices for the IP address matrix.
"Define script variables
creamstr = ""
compStr = ""
Room = 0
computer = 0
RoomStr and compStr store the values entered by the user. (Remember that the reading line is considered the import thread.) They are then converted to numeric values that involve consecutive and a column using a cint stored in the camera and PC variables.
2) First we must ask the user to enter the room number (100–105). We need to make sure that the user is not worth less than 100 or more than 105. Enter loops to validate the data. For example, if I need to enter a number greater than 0 for a specific program and I want to make sure that the import is positive, I can do so with the Who loop. The general pseudocode will be as follows.
Read the number
While <number = 0 (negative number of invalid data)
Print with problems, ask the user to re-enter
Read the number
End during
We'll use a Step loop to validate the camera value. See the pseudocode displayed
below and write the required vbscript declaration by applying the pseudocode
Do. The Vbscript code will be correct because it is written in bold.
Demonstration message "Enter room number (100-105)"
Get the stdin console input and assign the thread value to creamStr
Room = CInt (CreamStr)
Who <100 CAMBERS OR Room> 105
Use StdOut to enlarge the speaker twice by a cra (7)
Show ErrMsg "Error, only 100 to 105 !!!"
Demonstration message "Enter room number (100-105)"
Get the stdin console input and assign the thread value to creamStr
Room = CInt (CreamStr)
End during
So far, there have been:
'Define script variables
roomStr=""
compStr=""
room=0
computer=0
' Promt User to Enter a Room Number
WScript.StdOut.Write ("Please Enter the Room Number (100-105)...")
room = WScript.StdIn.ReadLine()
room = CInt(roomStr)
While room < 100 OR room > 105
WScript.StdOut chr(7)
WScript.StdOut chr(7)
MsgBox "ErrMsg"
WScript.Echo "Error, 100 to 105 ONLY!!!"
WScript.StdOut.Write ("Enter the Room Number (100-105)....")
WScript.StdIn.ReadLine()
room = CInt(roomStr)
Wend
Comments